Date:         Tue, 2 Jan 2007 18:00:15 -0800
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Kool Patch
Comments: To: Mike S <mikes@flatsurface.com>
In-Reply-To:  <20070103003735.1F7A91165CB@hamburg.alientech.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I'm not sure about Kool Patch, the brand is not sold here. It appears to be
a Latex version of 'Stop Leak' or 'Bakor Roof Glue'.

I have used the tar-based product from other makers on houses for a long
time with no failures.

Its a really simple product; black asphaltic goo with fibre reinforcement.
It doesn't really dry, especially in the shade, and I expect it to be on the
bottom of my vans for a long time.





On 1/2/07, Mike S <mikes@flatsurface.com> wrote:
>
> At 02:56 PM 1/2/2007, Roger Sisler wrote...
> >One product that will not work on the exterior for sound deadening, is
> >Kool seal. I see this mentioned in the archives, and I can give a
> >review
> >of this product.Kool seal is brushed on the wheel wells for sound
> >deadening.it one hold up.It has cracked and is peeling very badly.This
> >is
> >after less than two years.
> [...]
>
> Did you use Kool Seal, or Kool Patch? There's a big difference. Kool
> SEAL is a fairly thin coating. Kool Patch is a thicker coating which
> also contains a fiber reinforcing filler.
>
> Anyone on the list car to comment on Kool Patch before I commit to
> using it for undercoating? Good/bad experiences?
>



--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
www.crescentbeachguitar.com