Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 7 Jan 2007 17:25:40 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Bucking Vanagon again
Comments: To: Airic <airic@MIDSOUTH.RR.COM>
In-Reply-To:  <031901c7329e$f8d61630$0c02a8c0@eric91xuut3737>
Content-type: text/plain; charset=US-ASCII

The air flow meter should move much further than that, even at idle. It should never able to close with the engine running.

You have a major vacuum leak, bad intake valve or piston or swapped ignition wires or the spring was tampered way too much.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Airic Sent: Sunday, January 07, 2007 4:01 PM To: vanagon@GERRY.VANAGON.COM Subject: Bucking vanagon again

Not having another vanagon around to compare to I ask the experts. I have read many contraditory and misleading posts on the internet on "Vanagon syndrome". I don't know what is true.

1983 waterboxer

So out to the vehicle I went cleaning grounds, checking wiring, resistances, components, etc.

about 1/2 throttle position it bogs down, driving or sitting with a spare temp sensor two installed, o2 sensor disconnected, idle regulator bypassed, etc, none of this impacts it. But If I hold the AFM wiper arm so it does not go to the point that drives it to bog, it speeds up great and runs like a champ. The wiper also seams to loose its resistance reading about there too.

So is the AFM trash?

Is the afm arm supposed to flutter like this during normal steady state operation ? Because it does http://tech.bentleypublishers.com/servlet/JiveServlet/download/49-26764-2619 66-3932/AFM.gif

Does a new AFM fix the fluttering, or is there something else I need to look for to fix the flutter?

Other item of note to those who read this far, if you need a flat 4 subaru engine out of a outback there was one at the yard I went to yesterday, in the Memphis, TN $250, sorry I don't crate ship.

Thanks for any advice, and if I am bothering you please remove me from the list.

Eric


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.