Date:         Mon, 8 Jan 2007 14:35:25 -0800
Reply-To:     Pensioner <al_knoll@PACBELL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pensioner <al_knoll@PACBELL.NET>
Subject:      Fridge etc correction
In-Reply-To:  <200701082120.l08LKUDi011007@flpvm05.prodigy.net>
Content-Type: text/plain; charset="iso-8859-1"

Put the water in the tube BEFORE you hook it up to the fitting on the
manifold.  If you try to fill the tube with one end closed at the manifold
it takes longer.  When filling watch to see that the water doesn't go higher
than say 6" above ground level so as not to put any into the manifold
itself.  All the water should be in the tube.

Obvious if you've done it once but not so if you haven't.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.