>You may have some relatively minor problems. Before going the rebuild >route, do a leak down test. That will tell you a lot. If it looks like you >may have to do anything besides heads, then go for the complete rebuild. This was my thoughts, exactly! Even a wrong valve adjustment, perhaps because of a soft lifter, can cause low compression on a cylinder. Find out before you go in or spend a lot of money! Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.