hope this helps Bob Donalds Boston engine This is the dash wiring conversion for the vanagons to add a tach into the 84 vanagons First color noted is primary wire color and second color is strip color Change to was 1 power to dash lights grey blue 1 was empty 2 high beam blue white 2 brown 3 ground brown 3 grey blue 4 empty 4 blue white 5 clock red 5 brown 6 coolant temp yellow red 6 yellow red 7 fuel gauge purple black 7 red 8 power black 8 purple black 9 new wire from tach green 9 black I used green 10 blinker blue red 10 blue black 11 alt blue 11 blue green 12 dynamic warning from dash to ground 12 white red 13 low oil pressure blue black 13 blue 14oxs blue green 14 blue red ----- Original Message ----- From: "Michael Claire" <delp84@EARTHLINK.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, January 28, 2007 12:05 AM Subject: 88 Inst. Cluster in 85
> After installing an 88 instrument cluster into my 85, a couple of > problems arose. > > 1) The oil Pressure Warning light and alarm are activated shortly > after leaving the driveway. > > 2) the highbeam indicator blue lamp is activated on low rather than > high beam. > > Has any one got any ideas about how to fix these problems? > > -Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.