Date: Wed, 24 Jan 2007 18:28:17 -0800
Reply-To: Nathaniel Poole <npoole@TELUS.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Nathaniel Poole <npoole@TELUS.NET>
Subject: FW: Meltdown temp? ...Max Cuising Speed for AC
In-Reply-To: <C1DD55AC.3528%npoole@telus.net>
Content-type: text/plain; charset="US-ASCII"
Yeah, but that's in a puddle van with 50% more power. He's talking engine
temps of 350 degrees so one hopes he's talking aircooled. The real thing.
Nathaniel
On 1/24/07 1:49 PM, "Zoltan" <zolo@FOXINTERNET.NET> wrote:
> I cruised cross country many times with 75mph or more, without any problem.
> And those were old Vanagons without reconditioned engines, most all 2.1
> engines.
> Zoltan
> ----- Original Message -----
> From: "Burdett, Jean-Pierre" <jp.burdett@SPOTWAVE.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Wednesday, January 24, 2007 1:28 PM
> Subject: Re: Meltdown temp? ...Max Cuising Speed for AC
>
>
>
> Along similar lines...regarding the temp -
>
> I've been hesitant to drive mine faster than 105Kmh (65mph) ...but my
> wife asks me if we could go a little faster! Hmmmm
>
> Yes.. back to the Bus - Therfore...If everything is running cool, say
> 300-350 then would it be OK to cruise at 110kmh (68mph)? - assuming
> road is basically flat. What about 115 kmh?(70mph) Or would I be
> shortening the life span seriously / risk of over reving etc?
>
> Does it all depend of the HP the engine is making and how well it's
> running? I have oil cooler on it
>
> Thanks for your help gang
>
>
>
>
>
>
>
>
> JP Burdett | Product Marketing Manager
> Spotwave Wireless Inc.
>
> Tel: 613.591.1662 Ext.297 | Fax: 613.591.8107 | Mobile: 613.294.8942
> 1 Hines Road. Suite 204 Ottawa ON. CANADA | K2K 3C7
> jp.burdett@spotwave.com | www.spotwave.com
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Greg Potts
> Sent: Wednesday, January 24, 2007 2:47 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Meltdown temp?
>
> Hi Nathan,
>
> I'd say that extended running above 450 is to be avoided. Get off the
> gas ASAP and it'll drop back to 450 or less and you'll be OK.
>
> Running past 550 is going to reduce the life of the engine.
>
> The valve seats often don't drop at high temp... they drop when the
> engine cools down and the seats shrink. When my bus dropped the valve on
> the way to JBB it ran fine all the way from Scarborough to Fort Erie,
> but when I restarted it after our breakfast stop at the Duty Free I knew
> immediately that the seat was FUBAR. I had not passed 425 at any time
> that day.
>
> There are lots of variations on this theme. As they say: Your Milage May
> Vary.
>
> Happy Trails,
>
> Greg Potts
> 1973/74/77/79 Westfakia "Bob The Tomato
> www.pottsfamily.ca
>
>
>
>
> On 24-Jan-07, at 2:07 PM, Nathaniel Poole wrote:
>
>> With all the issues of popping valve seats on the AC engines, does
>> anyone have an idea what is the redline temperature when this is
>> likely to occur?
>>
>> Nathaniel
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.410 / Virus Database: 268.17.8/649 - Release Date: 2007.01.23.
------ End of Forwarded Message
|