Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2007, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 26 Jan 2007 19:28:12 -0800
Reply-To:     Loren Busch <starwagen@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Loren Busch <starwagen@GMAIL.COM>
Subject:      Re: A few questions from a newbie
Comments: To: Jeff Michal <jeffmichal@yahoo.com>
In-Reply-To:  <469114.44775.qm@web38804.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

> Firstly I am having the problem with the oil pressure light/buzzer coming > on randomly. I've read alot about this problem and I have gone back to the > guy I bought the van from to find out what he knew. He said he had replaced > both high and low sensors and the sending unit, and since he is my mechanic > I had him verify the wiring.

What weight oil are you using? Most run 20/50 or 15/50 if running synthetic

Second is a set of tires. I bought it with some incorrect tires on it and I > really want to get the right ones before something drastic happens. I see > everyone saying these Yokohama Y356 and Y370 tires are great and I am going > to get a set of them,

Check out the reviews at roadhaus.com for more tire info. IIRC not all reports on the Yokohama have been that good.

I've been ok for the last 2 or 3 weeks, except I am still hearing a > buzzing noise come from the fuel pump when I first start up.

RE: buzzing fuel pump-that's normal, you should hear it for a few seconds when turning on the ignition.

> Last question is about a new set of locks. The lock cylendar on my rear > gate is damaged so it no longer takes a key to unlock it (anything flat can > turn the lock). I'd like to get a completely new set, ignition, doors, gas > cap, and rear gate. Anyone know where to get this?

Any competent lock smith/lock shop should be able to fix that. Check the archives for info on removing the lock cylinder.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.