Date:         Sat, 27 Jan 2007 11:20:46 -0600
Reply-To:     Jim Felder <felder@KNOLOGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <felder@KNOLOGY.NET>
Subject:      Flashing oil light and buzzer problem SOLVED
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Oil light flashes and buzzer comes on above 2200 rpm. Problem was
solved by cleaning the terminals on the double connector (near the
thermostat housing) that connects the two sets of brown wires from
the engine sensors to the front of the car. It's down low in the
engine compartment, and is the one connector on the car that's shown
such corrosion.

Thanks for all the advice that led me to understand this once-
mysterious system.

Jim

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.