Recently I purchased them from the Dealer to do a friend's 87, both sides (fits 86-91). Here are the current prices at the Dealer (Bus Depot, Vanagain or GoWesty may have them cheaper, but since the Ventura, CA Dealer is two blocks away, I went for the convenience): 255 941 133 A Adjustment Pc, Hi Beam Bottom $7.28, 1 per beam 255 941 141 B Adjustment Screw, Hi Beam Top $3.98, 2 per beam 255 941 133 Adjustment Pc, Lo Beam Top Inner $7.28, 1 per beam 255 941 141 C Adjustment Screw, Lo Beam Top Outer $4.57, 1 per beam 191 941 297 Adjustment Screw, Lo Beam Bottom Inner $8.52, 1 per beam To do one side at their (retail) price: $35.61 + tax With the shop discount, I paid $28.49 per side + tax. I do wish the mounts were better plastic (or even metal for that matter). Now somebody write this down so that they don't have to check the SLOW archives ;-) While my buddy and I were at it, we replaced the Hi Beam Assy's and the Lo Beam Assy's (E-Code H4 style), all from the Dealer. Ordered and had the parts in two days. H4s had to come the Texas depot, none in California. -- Jim Thompson 84 GL 1.9 "Gloria" 84 Westfalia 2.1 "Ole Putt" 73 K Ghia Coupe "Denise" 72 411 Station Wagon "Pug" oldvolkshome@gmail.com http://www.oldvolkshome.com *********************************** On 1/31/07, Kim Brennan <kimbrennan@mac.com> wrote: > > I believe that there are 4 different types. 2 types for the > highbeams, 2 types for the lowbeams. These are further differentiated > into static (non-adjustable) posts, and adjustable posts. The plastic > ages (exposure to ozone) and becomes brittle. $79 seems a bit high. > Perhaps they were quoting for ALL the headlights, not just one? > > > On Jan 31, 2007, at 3:27 PM, Chris Snyder wrote: > > > I was trying to replace a head light lamp in my 1987 and the little > > white > > plastic thingie crumbled and now I need (I guess) new adjusters. I > > was quoted > > $79.00 from the neariest VW dealship. This sure seems a lot of > > money. I > > supposedly order all of them. Each side takes a certain number of > > several part numbers > > is what I was told. > > > > does any one have these adjuster on hand that you would like to > > part with for > > a price? > > > > Can a person just replace just the white plastic where the screw > > head is? > > > > Thanks, > > > > Chris S |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.