Date:         Sun, 4 Feb 2007 11:37:58 -0800
Reply-To:     TC <trclark@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TC <trclark@SHAW.CA>
Subject:      Re: The wire harness becomes brittle
Comments: To: Dennis Haynes <dhaynes@optonline.net>
Content-type: text/plain; charset=iso-8859-1

> You want to keep all those ground wires on the body, not the engine.
hmm  that would change how vw had it I mean there are 2 hex bolts on the
left top of the block
there are those 6 grounds from the wire harness go to thher
1 has that braid stap going to the body
Are you sugesting we dont ground wire haress wires to the block but extend
em & ground them to the body ??

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.