Date:         Thu, 1 Feb 2007 16:09:31 -0500
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Re: Inner round SA headlights mounitng?
Comments: To: Raimund Feussner <rfeussner@GMX.DE>
In-Reply-To:  <45C25160.8060905@gmx.de>
Content-type: text/plain; charset=ISO-8859-15; format=flowed

Raimund,

They mount to the van's body.

Basically, what you have to do is place a light in it's approximate
mounting position then put the SA grille on using just the outer pins.
you then move the inner light to center it in its opening and hold it
there while you remove the grille.  Duct tape (it's a Maine thing) the
light so it doesn't move.  Reinstall the grille to make sure the light
is still lined up. Remove the grille and mark where to drill holes in
the van.  Repeat for the other side.

Mike



Raimund Feussner wrote:
> Ok, maybe this has been in the archives many times...
>
> Are the inner round SA-headlights mounted directly onto the grille
> (if so, how?!)
> Or are they mounted to the chassis like the outers?
>
> Thanks
> Raimund
>