Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 1 Feb 2007 20:17:46 -0600
Reply-To:     Max Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <maxjoyce@IPA.NET>
Subject:      Re: Detailed list of what size sockets/wrenches/tools do you
              carry??
Comments: To: Jim Felder <felder@KNOLOGY.NET>
In-Reply-To:  <E48B678C-05E9-41ED-B7C0-3B46C2E7C418@knology.net>
Content-Type: text/plain; charset=us-ascii; format=flowed;
              x-avg-checked=avg-ok-35866B78

I second the motion to to use Muir as a guide and then fill in the additional needs for the Vanagon. I believe the bolt head that holds on the rear brake drum is 11 mm, but that's real close to 7/16''. I bought a $60 tool set at Sam's Club made by Crescent that had a bunch of tools in a gray plastic trifold case. it had US and metric, but not a huge selection of either. Had deep wall sockets and 1/4", 3/8", and 1/2" drive rachets in it too. I'd probably build a separate set for travel if I had the extra cash, but I don't currently leave the county without every tool I own, including the 3/4" breaker bar and pipe to get those axle nuts off.

DM&FS

>Just consider what most of the bolts on the vanagon are, obviously. > >Sockets: > >There's nothing smaller than 10mm that I can think of, except for >cable clamp screws and electrical connectors that are 7mm. > >There's no 11mm, and no 12 on the gas vanagon (but exhaust nuts on >the diesel are 12). > >There are 13mm all over the place, no 14 or 15 (except for the >tensioner clamp nut on the diesel). > >There are lots of 17, 19 and a few 22 (power steering rack union) >fittings. > >The steering wheel I think is 24. > >Any larger than that and you're talking bigger than 3/8 or 1/2 wrench >sizes. > >Of course you'll need a 5mm, 6mm and 7mm 3/8 drive allen (hex) >wrenches and a standard folding set of hex wrenches. One of the 3/8 >allen wrenches, I think the 5mm is only used on the diesel but I'm >not positive. > >You'll need two three inch socket extensions and one 8 inch. > >Box wrenches: All of them from 7mm up to 19mm. > >One combination screwdriver, one pocketknife, flashlight, telescoping >mirror, magnet-on-a-stick, curved longnose and regular slipjoint >pliers, small vise grips, cable ties. > >For clutch slave cylinder and a few other things, it's nice to have a >13mm wrench that's been cut in two, as sometimes the whole wrench is >too long. > >Electrical tape. Offset screwdriver for where a regular screwdriver >won't fit, especially helpful for westy interior. > >This will all fit in a transparent plastic container the size of a >book available at any big home store. The moveable dividers in these >plastic boxes accommodate everything mentioned above and then some, >except the the 24 mm nut. > >You can do about anything you're going to need to do on the road with >this kit. I keep one in each car. > > >Jim > >On Jan 31, 2007, at 11:31 AM, Chuck Baird wrote: > >>Morning Listmembers, >> >>My questions is this....Exactly what size sockets, wrenches, and what >>tools do you carry/use on your Vanagons? >> >>I searched the archives and really didnt find anything pertinent. >>Lots of >>posts on "carry a tool kit", but nothing detailed. If I missed it, >>please >>send me to the right message. Thanks. >> >>Why I ask this question, is that I wish to assemble a tool kit to >>keep in >>my beloved 85 Wolfsburg. Something as compact as possible, but >>complete >>in that I could fix just about any issue. >> >>I have a pretty extensive set of tools, which I load up and carry >>on my >>travels. What I am looking to do is only carry the exact sockets, >>wrenches, and tools needed. >> >>I parted out a 93 Eurovan Westy Weekended a couple of years ago. >>In my >>disassembly of this vehicle, I used the same 6 or so sockets and >>wrenches >>to strip that thing down to bare bones. A friend had an 82(?) >>Subaru back >>when it was nearly new. I was amazed at the time that only 4 sizes of >>sockets and wrenches were needed to do just about any kind of >>maintenance >>and repair work, and these were included with the car in its' tool >>kit. >> >>So.... any input would be appreciated. >> >>Chuck > > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.410 / Virus Database: 268.17.17/661 - Release Date: 1/30/2007

-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.410 / Virus Database: 268.17.17/661 - Release Date: 1/30/2007


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.