So I have convinced myself that I need to adjust the mixture screw on the AFM but I have some trepidation about it. There are two things I want to verify before I begin: 1. To adjust properly, I disconnect the O2 sensor and measure it's voltage at idle, with a target of 0.5VDC. 2. Turning the screw clockwise will lean the mixture? Mike Frost 86 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.