|
I have followed the instructions described in this link http://www.everybus.com/dworkin/vgon_jalousie/ to replace my driver side slider with a jalousie out of a 73 westy but something does not jive. The two vertical pieces that are 3/4" wide do not seam to accomodate the 1/4" filler piece that is supposed to be sandwiched between them. The 1/4" filler piece protrudes out most of the way. It looks like the 3/4" pieces should be 1" wide to be able to accomodate the filler piece. HAs anybody who has done this run into the same problem? I don't have my slider out and dont plan on taking it out for a while, but does anyone know the measurments of the slider on the driver side? Is it in fact 42 3/8" X 16 3/4" as these instruction say? BTW the router and tablesaw worked great at cutting the aluminium. Thanks Pascal |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.