The sensor is nothing more than 2 probes sticking into the coolant. If it is not leaking, (cracked),no reason to remove it. It unscrews, hex and all and there is an o-ring to seal it. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Loren Busch Sent: Friday, February 09, 2007 1:59 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Water Temperature Light While on the subject of the coolant tank/sensor, how does the coolant sensor come out of the tank? Wanted to pull mine the other day to check for obvious problems (intermitent blinking light when cold at startup) but couldn't figure out what to twist/poke/prod. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.