Date:         Wed, 21 Feb 2007 17:12:29 -0600
Reply-To:     Jim Felder <felder@KNOLOGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <felder@KNOLOGY.NET>
Subject:      Re: Drips at gasket, can't tighten more
Comments: To: Zoltan <zolo@FOXINTERNET.NET>
In-Reply-To:  <012d01c75604$71acdac0$2f01a8c0@FirstLaptop>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Zoltan,

It sounds like it's time to the heads and replace them or repair the
pits and put new rubber gaskets in there. It's a 30 hour job if you
have everything on hand, nothing supercomplicated. It's a great time
to replace your hydraulic lifters. There's plenty in the archives to
guide you through step by step.

Good luck,

Jim

On Feb 21, 2007, at 4:05 PM, Zoltan wrote:

> As the headline says.  Well, I thought, I need to retighten it but
> all the nuts are tight.  Is it time to take the engine out?  Or is
> there something I can still do?
> Zoltan
>