Date:         Wed, 21 Feb 2007 15:53:06 -0800
Reply-To:     Tom Young <tomyoung1@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Young <tomyoung1@COMCAST.NET>
Subject:      Re: [T2] Can I switch Vacuum cans on these distributors? No,
              I can't!
Comments: To: type2@type2.com
Content-Type: text/plain; format=flowed; charset="Windows-1252";
              reply-type=response

Removed the old vacuum can on the Federal distributor and went to remove the
can on the California distributor when I realized the two vacuum cans are
attached differently on the two distributors.  Although the cans are held in
place with two screws in both cases, the position of the screws is different
on the two cans, meaning I'd have to drill and tap the Federal distributor
body to get this to work, which I can do.  Of course, before I drill and tap
I'd have to remove the guts of the distributor to give me room to work.
Maybe I'll just order one from BD.
----------------------------------------------------------------
Tom Young
Lafayette, CA 94549
----------------------------------------------------------------

From: "Tom Young" <tomyoung1@comcast.net>
To: <vanagon@GERRY.VANAGON.COM>; <type2@type2.com>
Sent: Monday, February 19, 2007 4:08 PM
Subject: [T2] Can I switch Vacuum cans on these distributors?

> I believe the vacuum can on my 1982 (Federal) Vanagon is bad.  I happen to
> have a good vacuum can from a 1981 (California) Vanagon.
>
> Looking just at the advance specs in the TypeII library I read:
>
> Vacuum: 9-12deg Adv @ 8.2 In. Hg (Cal)
> Vacuum: 8-12deg Adv @ 7.9 In. Hg (Fed)
>
> Is there any reason why I couldn't just put the good California vacuum can
> on the Federal distributor?