Date:         Fri, 16 Feb 2007 22:17:04 -0500
Reply-To:     Normand Gagnon & Sylvie Brunet <Normand.Sylvie@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Normand Gagnon & Sylvie Brunet <Normand.Sylvie@ATTGLOBAL.NET>
Subject:      Re: And rear headrests too
Comments: cc: bfeddish@NETREACH.NET
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi,

I have done it like VW put headrest on rear seats of Westy Eurovans. I
found Vanagon headrest with plastic insert (I saw the drawing on EKTA
for europeans models).

Basically, I put metal tubes (welded) on plates. Those tubes (found at
the hardware store) with a notch for the plastic inserts. I have made
four notch in the plywood of the seat, then screw (metal bolts for wood
furniture that are flat on surface) the plates with tubes and put back
the back lining of the seat. So the metal tubes and plates are flat on
the wood.

With a file I have modified a little the post of the headrest to be able
to remove those before going to bed.

Normand
-------------------------
Date:    Sat, 10 Feb 2007 13:56:01 -0500
From:    BJ Feddish <bfeddish@NETREACH.NET>
Subject: And rear headrests too.

Has anybody put some type of headrest in the rear seat of their Westy? If so
can you pass along some ideas on how you did it?

Please cc me, I'm in digest mode.

Thanks,
Bryan
--