Date:         Wed, 28 Feb 2007 15:00:57 +1000
Reply-To:     David Yates <dyates1@BIGPOND.NET.AU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Yates <dyates1@BIGPOND.NET.AU>
Subject:      Re: more auto trans questions
Comments: To: Ryan Haagensen <rphdiego@HOTMAIL.COM>
In-Reply-To:  <BAY113-W42ECCE0F7FDADC4EC332BC5810@phx.gbl>
Content-Type: text/plain; charset="windows-1250"

Hi Ryan,

I used 4 short lengths of the appropriate hose and the rest was an
appropriate diameter copper tube.  I had to run it from AT to radiator and
it was MUCH cheaper to use the copper.  I also needed 2 clamps for each
coupling = 8 clamps.

FWIW

Dave
downunder

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Ryan Haagensen
Sent: Wednesday, 28 February 2007 12:38 PM
To: vanagon@GERRY.VANAGON.COM
Subject: more auto trans questions

Thanks for everyone's input on my auto trans questions. Now all I need is a
source for new trans cooler hoses or do I use regular heater hose and cut it
to length?

Ryan

83 Westy
84 Westy



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.4/705 - Release Date: 27/02/2007
3:24 PM


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.4/705 - Release Date: 27/02/2007
3:24 PM


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.4/705 - Release Date: 27/02/2007
3:24 PM