Just want to chime in here. The unit that vancafe and I both sell is a quality unit made of bronze and painted black. It does have the restrictor inside and it also has the ends with the raised ring to keep the hoses from popping off. Yes you can "roll your own" for much less however this is saying that your time is worth nothing. If you factor in your time planning out this job, running around getting supplies, learning to braze, buying a flaring tool for the pipes, etc. this unit is cheap at $99. The other problem is that if you don't have the flared ends then the hose can always just pop off on you even if it is double clamped (seen it happen many times). So buy the $45 unit with no flares (not worth it in my opinion), or make your own for $12 in parts and 10 hours of work. Or just buy one, and use your time relaxing or making money. Your time is worth more. Ken Wilford John 3:16 www.vanagain.com -------------- Original message -------------- From: Jake de Villiers <crescentbeachguitar@GMAIL.COM> > If I was okay with an ugly one, I'd put one together in an hour from my > plumbing supplies; if I wanted to wait, I'd go for the nice one. :) > > Just my take. > > On 3/12/07, TC wrote: > > > > Function b4 form :) > > > > ----- Original Message ----- > > *From:* Jake de Villiers > > *To:* TC > > *Cc:* vanagon@gerry.vanagon.com > > *Sent:* Monday, March 12, 2007 4:21 PM > > *Subject:* Re: In need of cooling system parts > > > > Yup, half the cost and twice as ugly! :) That welding is as bad as > > mine. > > > > > > > > On 3/12/07, TC < trclark@shaw.ca> wrote: > > > > > > 1/2 that price over here > > > http://www.justveedubs.com/more.php?p_id=64&s_vmdl= > > > http://www.justveedubs.com/jvd_vw_catalog.php > > > > > > ----- Original Message ----- > > > From: "Jake de Villiers" < crescentbeachguitar@GMAIL.COM> > > > To: > > > Sent: Sunday, March 11, 2007 11:31 PM > > > Subject: Re: In need of cooling system parts > > > > > > > > > > Van Cafe has those. > > > > > > > > http://www.van-cafe.com/vanagonparts.jsp?pa=p&p=366178303 > > > > > > > > On 3/11/07, Scott Charles < ve7fyc@shaw.ca> wrote: > > > > > > > > > > Hey everyone. > > > > > > > > > > I am in need of a "H connector" fitting for a 84 Vanagon. It is the > > > part > > > > > between the coolant bottle and the engine. The origanal has cracked > > > and > > > it > > > > > has to be replaced. Local supply shops have come up empty and are no > > > longer > > > > > being made. > > > > > > > > > > Does anyone have a spare one around that they would like to sell? > > > > > > > > > > Thanks for your time. > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > > > > -- > > > > Jake > > > > 1984 Vanagon GL > > > > 1986 Westy Weekender "Dixie" > > > > www.crescentbeachguitar.com > > > > > > > > > > > -- > > Jake > > 1984 Vanagon GL > > 1986 Westy Weekender "Dixie" > > www.crescentbeachguitar.com > > > > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > www.crescentbeachguitar.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.