Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2007, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 13 Mar 2007 10:54:28 -0600
Reply-To:     don spence <dkspence@TELUS.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         don spence <dkspence@TELUS.NET>
Subject:      in need of cooling system parts
In-Reply-To:  <20070313040027.5CWJDXEK4T@priv-edmwaa12.telusplanet.net>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

When bypassing a leaky rear heater core I found some "pre-tinned" copper bits at Home Depot. (45 and 90 degree angles etc.) These have a crimped ridge about a half inch in from each end to hold the tinning solder, which also acts as a clamping ridge when connecting hoses.

On 12-Mar-07, at 10:00 PM, Automatic digest processor wrote:

> Subject: Re: In need of cooling system parts > > Yup, and you could solder some galvanized wire around the > circumference of > the pipe to form a lip for the hose as well, ala some Subaru > fabricators. > > Dave > > On 3/12/07, Jake de Villiers <crescentbeachguitar@gmail.com> wrote: >> >> No reason you couldn't fabricate your own Robert. That was kinda my >> point. >> I wouldn't be afraid to solder one up out of copper, although I've >> been >> told >> that galvanized electrical conduit makes a better electrovalent >> match with >> the aluminium parts of the motor. That stuff solders okay too. >> >> It really helps to have a bit of a lip at the end to help retain >> the hose, >> although double clamps work as well. >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.