Date:         Wed, 14 Mar 2007 17:01:15 -0400
Reply-To:     BJ Feddish <bfeddish@NETREACH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BJ Feddish <bfeddish@NETREACH.NET>
Subject:      Continuing Saga of Camper Gear Removal and Rust Repair
Content-Type: text/plain; charset="us-ascii"

Thanks all who have been helping me fix my van this "spring". That paint
from PaintScratch.com matched pretty well. 1 can out of the 2 ordered did
not work but they are sending a new one out. You can see the painted panel
here at http://www.charlestownsoftware.com/vw/van.html . I repaired the hole
behind the passenger wheel to the left of the sliding door and under the gas
cap.

OK, on to the camping gear removal. I'm about half way there, the Propex
stuff is really integrated and has added allot of complexity to this.  While
taking off the hose to the drain the connector shattered. A picture is here:

http://www.charlestownsoftware.com/vw/sink.html , does anybody have one of
these?

Also, (don't even ask how I did this, it's too embarrassing) I yanked the
wires out of the back of the connector for the Propex that connects to the
thermostat.  Any chance somebody has a wiring diagram of that or can take a
picture for me? It's an older unit that was bought as a group purchase from
this list back in the 90's.

It's getting ready to rain so the van is back in the garage for now.

Feel free to CC me, I'm in digest mode...

Thanks,
Bryan