On 3/16/07, Mark Drillock <drillock@earthlink.net> wrote: > Looks like a return bump stop for the clutch or brake pedal. Few people > would see one since that part of the vehicle is seldom accessed. > > Mark
Yes! (and I'm missing one) Yah I picked a tough part. Ben inspired the choice. Plus it happend to be on workbench. I currently have servo/pedals/Al.frame out and will rebuild. Of note, the pedal bushings are pricey. ($16 Can./ea. 2 per pedal) And if one is ever doing this job, make sure hole that accepts pin to connect to brake or clutch MC clevis, isn't really worn. Hole in my clutch pedal has less than 1/8" left! I will make a replacement piece out of mild steel rod. I hope to get it welded in, then drilled out.
-- Neil Nicholson. 1981 Air Cooled Westfalia. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.