Anyone tried something like CLR in a radiator. If it's clogged as bad as this one it couldn't hurt to try. Yes/No??
On 20-Mar-07, at 10:00 AM, Automatic digest processor wrote: > Took a look > inside the Rad through the In/Out Rad hose flanges. Cannot see a whole > lot but sure enough, the cores I could see were approximately 50% > closed-up with hard baked-on corrosion/scale. Back flushed with a > water > hose. No significant gunk came out. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.