Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2007, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 20 Mar 2007 05:13:47 -0800
Reply-To:     Blake Heinlein <blakeheinlein@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Blake Heinlein <blakeheinlein@GMAIL.COM>
Subject:      Re: CV Joint Vibration
Comments: To: Benny boy <huotb@videotron.ca>
In-Reply-To:  <45ff398f.74c993ac.3873.1605SMTPIN_ADDED@mx.google.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Ben,

I went home last night and torqued all the bolts on my CV joints. They were good. I also reved the engine while parked just to make sure it the hum wasn't belts, pulleys, etc. I still think it's the CV joints. I'm fairly confident that I only had clean grease on the CV connection point and I really don't want to pull them off just to clean them and do all that work. Thanks for eveyone's help. I think I'm just going to return it and try to get a different brand. I'll let you know how it turns out.

Thanks, Blake -- Blake Heinlein http://blakeheinlein.googlepages.com/

On 3/19/07, Benny boy <huotb@videotron.ca> wrote: > > Blake, remove them! now! After removal check for dirt in between the CV > and > the tranny and on the wheel side. I think one is not sitting properly. > > I say NOW because i had a bad eperience with one not properly installed, > it > basicaly expoded on the tranny side. > > If no dirt in between, it take only a few miles so they come kind a smooth > and loose so check if they are as tight as before. Also, if they are > clean, > moving smooth (CV movement), swap them: > http://www.benplace.com/cv_joint_swap.htm > > Something is wrong, good CV don'T make vibration or noise. > > Still, i have my doubts on those 1 piece drive axle EMPI... > > I prefer LOBRO or some German one. Those cheap one sell for as cheap as > 20+$ > at CIP1, i had them on my 79 (only on 1 side), a month > later.......pffffff, > men, you should have seen the "play" they had. > > Cheers, Ben > http://www.benplace.com/cv_joint_maintenance.htm >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.