Hi Roger. Thanks for info. I will try that. Am still looking for solution to: I have the dash off and wiper parts removed. Am looking at P 92.2 of Bentley. Can't see names for some parts, but will do my best to describe again. The question I still have is how to mount new wiper shaft assemblies. One to frame that wiper motor bolts to and other to smaller frame piece. They look like they are press fit to frame. Obviously both bolt to sheet metal of van just beneath windshield. Thanks for any help, Neil.
On 3/28/07, Roger Sisler <rogersisler2000@yahoo.com> wrote: > If your doing this replacment because your wiper arms go all over the place > (when they shouldnt), put a washer and lock nut on the shaft.The wiper > shafts are a tapered shaft(like ball joint shafts). You can remove the nut > and the arm will still stay attached to the shaft(try it).Prying the wiper > arm will over come the force(the taper shaft is small,after all) that > attached the arm, and it will come off.The nut presses the arm onto the > tapered shaft. > > Basically, most of the attaching force for the wiper arm is in the taper > and splines.A washer and locknut adds clamping pressure to the end of the > shaft. Then you got good grip from the taper and end.Do this, and the > wiper arm will probably stop wandering. It will be in the right place when > the rain comes. Dont need new wiper arms. >
-- Neil Nicholson. 1981 Air Cooled Westfalia. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.