They are occasionally available used on the samba under Classified, Parts, Type 2 Bus/ Vanagon parts. Tom B.- you can never have too many spare parts On Apr 4, 2007, at 9:32 AM, Keith Ovregaard wrote: > My 84 Westy was missing the rear table support, so I talked the > local muffler shop guys into making a new one out of exhaust pipe. > It's the same diameter. I had them bend the pipe at 90° and weld a > T at the top end with a nut welded to the side of the T. Cost me > $20 plus a can of brown spray paint. > > With your 89 Westy, you will have to make the top end to match the > later model table connector, but that should be doable. Buy a knob > at OSH (or any good hardware store) with a retainer clip to keep > the knob on the table leg. > > Hope that helps > > > Keith O. > 90 Westy Syncro "VikingWagen" > Past VeeDubs in the family > 1984 Westy "Brownie" > 1980 PU diesel > 1978 Rabbit diesel > 1979 Rabbit gasser > 1963? 23 window Splitty > 1965 Bus > 1969 Bus > 1959 Bug |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.