Date:         Mon, 2 Apr 2007 22:18:00 -0500
Reply-To:     Jim Felder <felder@KNOLOGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <felder@KNOLOGY.NET>
Subject:      Re: Putting all that camping gear back in...
Comments: To: BJ Feddish <bfeddish@NETREACH.NET>
In-Reply-To:  <069501c77587$e4c503a0$5d19a8c0@cspfr2>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

I did this about four years ago, but I had never seen the stuff
installed as I bought the car with a floor full of camping gear.
There's nothing particularly difficult, nothing to be overly
concerned about. It went a lot fast than I thought it would. Just
mind the Bentley as the main cabinets and bed/seat have to go in in a
certain order. Obviously, you don't want to install a cabinet before
wiring connections are made, so make sure you account for all of those.

Jim


On Apr 2, 2007, at 7:34 PM, BJ Feddish wrote:

> OK. The rust is done and everything is cleaned up. I'm getting
> ready to put
> all that camping gear back in. I've got the directions for taking
> it out on
> hand and I even have digital photos taken when I was removing the
> stuff. I'm
> a little paranoid about putting it back as I don't want to put
> anything back
> in the wrong order. Is there any suggestions like "be sure to put
> the hose
> bearings in before the flux capacitor." or any other warnings to that
> effect? I'd hate to be 90% of the way through and realize I forgot
> something.
>
> BTW, you don't even want to know what "oozed" out of my old sink drain
> before replacing it with a new one.
>
> Thanks,
> Bryan
>