Date:         Wed, 4 Apr 2007 08:32:57 -0700
Reply-To:     Keith Ovregaard <kovregaard@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Keith Ovregaard <kovregaard@COMCAST.NET>
Subject:      Re: Table Leg
Comments: To: colorworks@GCI.NET
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

My 84 Westy was missing the rear table support, so I talked the local 
muffler shop guys into making a new one out of exhaust pipe. It's the 
same diameter. I had them bend the pipe at 90° and weld a T at the top 

end with a nut welded to the side of the T. Cost me $20 plus a can of 
brown spray paint.

With your 89 Westy, you will have to make the top end to match the 
later model table connector, but that should be doable. Buy a knob at 
OSH (or any good hardware store) with a retainer clip to keep the knob 

on the table leg.

Hope that helps


Keith O.
90 Westy Syncro "VikingWagen"
Past VeeDubs in the family
1984 Westy "Brownie"
1980 PU diesel
1978 Rabbit diesel
1979 Rabbit gasser
1963? 23 window Splitty
1965 Bus
1969 Bus
1959 Bug