Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 4 Apr 2007 13:24:08 -0400
Reply-To:     dvdclarksn@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Clarkson <dvdclarksn@AOL.COM>
Subject:      Re: another propane question, overflow valve
Comments: To: matthiaskuster@VERIZON.NET
In-Reply-To:  <1A39E4DE-400B-470E-8085-78764609B07F@verizon.net>
Content-Type: text/plain; charset="us-ascii"

I had the same situation once due to a cracked regulator. The RV propane guy that replaced it for me put the next one on at an angle to keep it from cracking. What he said happened was that during weather this time of year running the fridge caused the regulator to cool and sweat. When the temperature dropped below freezing at night this condensation got into a part of the regulator and caused it to crack and leak propane. This scenario was accurate as I had been at a bluegrass festival in Western North Carolina about this same time of year and the temperature varied from 75 during the day to 30 degrees at night. I had no further problems once the regulator was re-installed at an angle so the condensation would run off.

David Clarkson 90 Westy (237k)

-----Original Message----- From: matthiaskuster@VERIZON.NET To: vanagon@GERRY.VANAGON.COM Sent: Wed, 4 Apr 2007 11:52 AM Subject: another propane question, overflow valve

Hi list,

Likely this can be found in the archives, but I will hog some bandwidth here anyways:

I just had my propane filled with 3 gallons. The tank has the screw type overflow valve on it. The last time it had propane in it might well have been a decade or so ago... I cleaned and prepped the tank and accessories, redid the pipe connections incl teflon tape, then painted the tank and skid plate. Cleaned the tags and labels as good as possible. Now, I think I heard that the tank and system should have been evacuated before filling. This didn't happen, or I doubt it did. When the guy was filling it there was stuff spewing all over the place. All my appliances work fine with the propane now, great actually, but I do have propane smell. I checked all unions and connections and don't see any bubbles. If I open the screw on overfill valve, gas is coming out. Now for the question: Must this overflow valve be opened at filling time? Do I have too much pressure in my tank/system since the air wasn't evacced?? If I turn the valve on the tank off (not the overflow) the gas smell disappears. Should I open the overflow valve until no more gas escapes to even out the pressure?

TIA

Matthias ________________________________________________________________________ AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.