I replaced my pop top seals on the 84 Westy in summer 2006, and didn't have to use any adhesive. The seals had to be pressure wedged along the edge all around with no worries about whether or not they'd remain adhered. SamC ----- Original Message ----- From: "Bruce Todd" <beeceetee@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, April 14, 2007 7:15 PM Subject: Pop Top Seal Adhesive - 86 Westy
> Something I've put off for a little while is replacing the main pop-top > seal > on my van - which by the way was something the PO threw in when he sold me > the van last June. > > That being said, I'm stuck with a seal (no pun) that requires an adhesive > to > bond it to the fibreglass top. I've spent the last two hours scouring and > cleaning the top and am ready to apply the seal - something I plan to do > tomorrow. The recommended seal adhesive as per the instructions is a > product from 3M that is no longer available. > > Can someone recommend a worthy product - something I could likely find at > a > Home Depot or Canadian Tire Outlet? > > Thanks, > > Bruce Todd > Vancouver, BC > 86 Westfalia Synchro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.