1988 Wolfsburg Edition with the AC Ducts down the center. My top ac ducts were cracking and falling down due to broken plastic under the metal plate and along the top sides. The ducts are being held in place from the top and over time that starts to break down. To fix it, I put a thin aluminum band (1 inch wide by 1/8" thick)around the outside of the duct and then put the ducts back in, trapping the top of the band between the duct and the roof. Roof of Vanagon Aluminum strip plastic duct metal plate
The aluminum strip was easy to bend into shape and I did not have to drill any holes in the strip either. It looks good and the best part is that the ducts should not fall off... If you want pictures email me...
Robert |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.