This is pretty common. The end steel square that opens the mechanism is a nice strong solid steel. The rest of the handle is made of a cheap material commonly referred to as pot metal. Its a little softer than aluminum in my opinion. The end steel piece is molded into the pot metal. When its new, it is nice and tight. Every time you open the door, the pot metal flexes a little bit. It flexes, and then it stretches, and then it cracks. Shortly after that you open the door one day and handle breaks off in your hand. I have found only one way of fixing these, outside of replacing them. By the time you get to this fix, the pot metal is already cracked and expanding from its original round shape. Compress it back to its original shape using a press, a vise, a hammer, whatever you have. But you need to be fairly exact, you want it to be round. Using a press with a round arbor is the best. You can get a steel sleeve made for you by a chine shop. There is not a lot of room in there, so the sleeve will only be about .020" or so. Have the inside diameter of this sleeve be a tight fit over the pot metal end - the round part - when you take it apart you will understand. This should be tight to the point it really does not slide on. Heat it with a torch so it expands, and then slide it on. This will keep the end round portion from cracking again. This does not however keep the pot metal from wearing where it meets the steel end piece internally. So I drill a hole through the sleeve, pot metal, and end steel square. Very smal hole. Then I put a steel roll pin there. This locks the steel square to the steel sleeve. No more pressure on the pot metal. Been working for years with no problems. Z
----- Original Message ---- From: Damon Campbell <damoncampbellvw@YAHOO.COM> To: vanagon@GERRY.VANAGON.COM Sent: Monday, April 9, 2007 4:02:22 AM Subject: loose '84 sliding door handle
Assuming my handle isn't broken yet, has anyone figured out a root cause as to why the sliding door handles - especially early ones - get all loosey-goosey feeling? It still works and feels normal in that regard, but it is just a bit floppy in it's hole. Thanks, -Damon
____________________________________________________________________________________ Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames.yahoo.com/platform?platform=120121
____________________________________________________________________________________ Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. http://tools.search.yahoo.com/toolbar/features/mail/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.