Date:         Tue, 10 Apr 2007 13:49:01 -0700
Reply-To:     Steven Johnson <sjohnso2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Johnson <sjohnso2000@YAHOO.COM>
Subject:      Re: Brake light sensor switch adj.
In-Reply-To:  <cf4.9f140f0.334d4dc5@aol.com>
Content-Type: text/plain; charset=iso-8859-1

Having experienced this recently I can say from
combing over the archives at the time that there
were some posts that stated that sometimes new
switches don't work.  So you might have a bad
switch or two.  Other than that I would suggest
that you bleed the system such that you get all
of the old brake fluid out so there is nothing
to crud up the system and switches.

Steven

--- Jeff Oxroad <Oxroad@AOL.COM> wrote:

> SO, I replaced the switches. And the lights come on
> exactly like they did
> before the replacement. Now they're not so bad that
> the pedal must be fully
> depressed. But I'd like them to come on when I just
> about touch the pedal as
> opposed AFTER the braking process has started. Just




____________________________________________________________________________________
Food fight? Enjoy some healthy debate
in the Yahoo! Answers Food & Drink Q&A.
http://answers.yahoo.com/dir/?link=list&sid=396545367