I did that some time ago, i put the ring back just so it look good, no need for it :-) Ben pdooley wrote: >Benny- I noticed in the diagrams that the small piece of hose attached to >the fuel injector does not appear to have a hose clamp on it, just that >metal ring. >But- the metal ring doesn't appear to "clamp" the hose to the injector. >Your repair shows a hose clamp *and* the ring installed on the injector. > >What gives? Is the metal ring doing anything? > >-----Original Message----- >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of >Benny boy >Sent: Sunday, April 15, 2007 9:06 PM >To: vanagon@GERRY.VANAGON.COM >Subject: Re: Fuel hose diagram > >I have work pretty hard on that section, i'm sure it can help you, i hope. > >http://www.benplace.com/fuel_line.htm > >Cheers, Ben > >-------------------------------------------------------------------------- >I am fixing to replace all the hoses in the engine compartment on my 1987 >Wolfburg. Does any one have access to the diagrams for the fuel hoses? the >Bentley leaves a lot to be desired in this respect. > >Any information would be appreciated. > >Chris Snyder </HTML> > > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.