In a message dated 4/16/07 4:04:49 AM Eastern Daylight Time, bus.mail@IAE.NL writes:
> Besides removing the little plastic block you also have to add a relay. On > the fuse panel you'll find a copper link on one of the relay positions, > remove this, and place the wiper relay. Don't know the number now, think > is was 19 or 99, the latter one being a programmable. > > #99 wiper relay is programmable.. you can find these in any '90's passat.. the #99 relay alloys you to set the wiper passes at your desired time intervals. chris chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.