Date:         Sun, 15 Apr 2007 10:15:29 -0700
Reply-To:     Michael Elliott <camping.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Elliott <camping.elliott@GMAIL.COM>
Subject:      Re: Mirrors fold in at high speed
Comments: To: "Jack R." <jack007@comcast.net>
In-Reply-To:  <003801c77f73$da6d9610$c102a8c0@jackamdgoblue2>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Wait -- it wasn't a garden hose washer that I used. I tried that and it
just wasn't a good fit. Instead, I cut a piece of insulated wire, maybe
18 gauge stuff, regular PVC insulation, to the right length to form a
ring to sit inside the ball and socket joint -- essentially the same
idea as the washer, but a better fit. Tightened right down, nice as you
like.

--
Mike "Rocket J Squirrel" Elliott
71 Type 2: the Wonderbus
84 Westfalia: Mellow Yellow ("The Electrical Banana")
74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
KG6RCR



Jack R. typed:
> Mike,
>
> Just the solution I was looking for!!!  Thanks for the tip!!!!!
>
> Jack
>
> -----Original Message-----
> From: Michael Elliott [mailto:camping.elliott@gmail.com]
> Sent: Sunday, April 15, 2007 11:24 AM
> To: Jack R.
> Cc: vanagon@GERRY.VANAGON.COM
> Subject: Re: Mirrors fold in at high speed
>
> I cut a rubber grommet to fit in the ball 'n' socket joint on the mirror
> assembly. I think I made it from a garden hose washer. Got the idea from
> someone here on the list who is a lot smarter than I. It works like a
> peach.