Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2007, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 15 Apr 2007 23:58:27 -0700
Reply-To:     Zoltan <zolo@FOXINTERNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zoltan <zolo@FOXINTERNET.NET>
Subject:      Re: Intermittent Wipers?
Comments: To: Michael Hart <mjhart853@YAHOO.COM>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original

I had this intermittent problem once. There is a little plastic block inserted into the area where it should be clicking down to the interm. switching. Take that out and it will work. Only, you have to take the whole thing out first. Zoltan

----- Original Message ----- From: "Michael Hart" <mjhart853@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, April 15, 2007 9:07 PM Subject: Intermittent Wipers?

> As I continue to tinker with my '87 Westy, I have a couple of new > questions for the 'List'. > Previous problems solved with your help. > > 1. Intermittent wipers. > My '87 Westy (GL) does not seem to have this function, whereas my '85 did, > and I did find this useful (it actually does occasionally rain here in > California Bay Area). > (I've tried pushing down on the stalk, but any further presure would seem > to lead > to snapping it off!) > Any suggestions on how to add this function? > > 2. Jump seat > I'm planning to add a carat style jump seat on the passenger side of my > '87 Westy. > I've picked up a seat from a junk yard and cleaned it up. > I've also looked carefully at another '87 GL van with the jump seats to > measure > up the mounting points etc. > My '87 Westy does not have the floor 'sockets' welded to floor or the > plates behind > the battery bulkhead, so I'm working out how to mount the seat. > Has anyone done this job, and if so, how did you do it (take floor plates > from a donor van; > build something similar; etc...) > Also, the seat belt I got with the seat is missing the plastic circular > piece that contains > the big spring to retract the belt (presumeably someone got to that before > I did). Anybody > know the part # of this small piece (of for the complete belt unit) and/or > where I could get > one of these from? > > Thanks, > Mike > '87 Westy > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.446 / Virus Database: 269.4.0/761 - Release Date: 4/14/2007 > 9:36 PM > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.