In a message dated 4/26/07 6:20:22 AM Eastern Daylight Time, RAlanen@AOL.COM writes:
> Gregor, remove the drift pin from the handle. like i said in my previous post, if the window latches, id leave it be.. reason i say this is - removing the drift pin is a tricky job.. the pins are soooo thin , that any repeated force even light tapping with a hammer and a punch , can mangle the pin..(BTDT) and in the worse case scenario, you can bend the potmetal latch.. this is one of those things where its better to just let it be, IMO.. chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.