I am in the middle of replacing a Starter on a 91 Vanagon - Automatic - Westy.
The starter I removed has two clip on spade wires, one thick red, one thin yellow.
The replacement starter only has one spade terminal, what do I do with the other wire?
Also, strange thing, when I removed the wires and let them dangle down, red oil - maybe PS or Trans fluid, dripped out of the protective sleeve the wires are in.
Any advice is greatly appreciated!
Thanks,
Jack
N. of Detroit. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.