Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2007, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 24 Apr 2007 06:12:57 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: muffler repair in Chicago area
Comments: cc: jensmiles2@HOTMAIL.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 23/04/2007 2:26:06 P.M. Eastern Standard Time, LISTSERV@GERRY.VANAGON.COM writes:

Hi All, Is there anyone out there that can recommend a muffler place in the Chicago= area? My '87 Westy needs a new muffler. =20 =20 Also, anyone have their complete exhaust system repaired recently, if so, c= ould you provide me with a quote of cost to replace the entire exhaust syst= em? Just curious. =20 Thanks in advance,

Jenny, may I suggest you consider using my Stainless Steel Exhaust system - _STEBRO/Vanagon Stainless Steel Exhaust System_ (http://members.aol.com/Fkc43/stebro.htm) . This will insure it's the last time you have to have your system replaced. The labour to change an exhaust system on a Vanagon can vary wildly due to the problem of getting the eight connections at the four head flanges off. If the come loose easily then things are fine. But if any of the connectors break because they are seized and badly rusted then your in for some labour charges to fix the problem. It's always best to remove all the connectors so that the exhaust ports can be cleaned and made flat so the new gasket will seal well. Then, use all new stainless steel bolts, coated with anti-seize to install the new headers to the heads. The other problematic area is the muffler brackets. If your brackets are fine then replacing with a stock muffler is easy. If your brackets are rusted away then you will need to remove them and the bolts tend to seize in the engine/muffler carrier and can be a lengthy job to remove. Those brackets are expensive dealer items only hence one of the reasons to consider my STEBRO/Vanagon Stainless Steel Muffler, as it comes with it's own integral brackets plus the tail pipe. You will see on my website an Installation guide for my stainless steel system. This guide can be useful to anyone installing any system including OEM ones. Hope this helps !

Cheers,

Frank Condelli Almonte, Ontario, Canada '87 Westy, '90 Carat, '87 Wolfsburg (Forsale) & Lionel Trains (_Collection for sale_ (http://members.aol.com/Fkc43/trainsal.htm) ) _Frank Condelli & Associates_ (http://members.aol.com/Fkc43/busindex.html) - Vanagon/Vanagon Westfalia Service in the Ottawa Valley _Vanagon Stainless Steel Exhaust Systems_ (http://members.aol.com/Fkc43/stebro.htm) _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper camping event, Almonte, ON, June 07 ~ 10, 2007


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.