In a message dated 4/29/2007 4:37:13 PM Central Daylight Time, inua@CHARTER.NET writes:
> Warm the engine, shut it off. Disconnect the clip at the end of the > idle stabilizer valve - that cylindrical thing right on to p of the > engine with the clip and wire on the end. The engine idles steady it's just that it idles about 1,100 to 1,500 after the engine warms up and the thermostat opens. In neutral. In gear it idles at about 900 to 1000.. before I put in a new thermostat it always idled at 700 to 800 in neutral. I need to know what or how to lower the idle when the engine is at normal temp. Thanks, Chris Snyder </HTML> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.