In a message dated 5/3/07 11:33:31 PM Eastern Daylight Time, vw4x4@VERIZON.NET writes:
> > > > I'm going to replace my dash board pads > on my 86 Syncro. Its cracking very bad. Has > anyone removed the dash pad, and replaced it? > Looks like its rivited on from behind? I have a used > dash that has a lot of rust on , and its the wrong year, > so I thought I might just be able to swap the pads?? > > > > eric... you need to remove the whole dash to remove the pad.. its a big job. might as well replace the heater blower motor and core too, as well, since your going to be back there anyway and this is not a job you want to do twice.. chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.