Date:         Sat, 5 May 2007 16:01:56 -0400
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Re: Oil pressure sender thread size?
Comments: To: Nathan Mc Blain <nmcblain@YAHOO.COM>
In-Reply-To:  <897545.81539.qm@web51404.mail.re2.yahoo.com>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

I bought an adapter so that I can screw my 1/8 27 NPT aftermarket sender
(extension, actually) into it.  The male thread on the adapter is 10 X
1.  That way there is no chance of buggering up the threads in the
engine case.

Mike

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.