>For those of you thinking about adding Westy interiors to your open floor plan: >One thing that really helped me when I did my 84 was the fact that I went and removed >the interior that I bought from the donor vehicle. >Not only did I save on shipping, but I really knew how to put it all back in. >Yeah, the Bently book is helpful ..But, knowing that 'this piece fits this way into that piece because >YOU took it apart..that is a big advantage. >Well worth the "extra" time to go get your "new" interior out yourself because >you will probably save it back on the re-install. yah and 2 other points about the removal for ppls that dont dot it all the time 1) take that digital camera along esp for the water/ electrical connections 2) put all the bit for each component ina freezer bag & label that bag -get a big ones & smaller 1 -the bigger 1 ia an area disasemble & the smaller has bits from that larger area eg when the sink area goeas back together get the sink area baggie with all the samller bags in side |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.