No need for that primer... in your case. Don't use 518 under cap nuts, use TRS. Ben.
Giasson, Pascal (DNR/MRN) wrote: >I guess I was not clear with my last post...not the first time...and >likely not the last...sorry folks > >I have the Right Stuff for the heads and for under the cap nuts. I have >the Permatex Anaerobic Gasket maker #51813 for the push rod tub seals >and the lower black O-ring on the cylinder. My question is: the >instruction on the 51813 says to use a special primer (which I bought) >and then apply the 51813. The primer is in an aerosol and it would be >very challenging to use it without getting it everywhere, which would >not be good. What do people do? Can the 51813 be used with out the >primer? > >Thanks > >Pascal > > >-----Original Message----- >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf >Of Ben >Sent: May 11, 2007 3:22 PM >To: vanagon@GERRY.VANAGON.COM >Subject: Re: Head sealants?? > >NO 518 on HEADS!!!! ??? You need "The Right Stuff" on heads Gasket, 518 >is good elswere (i like to put some on the lower blacl O-RIng BUT >NOWHERE on head gasket!!! >Ben > > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.