Date:         Wed, 9 May 2007 12:28:02 -0700
Reply-To:     David Kao <dtkao0205@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Kao <dtkao0205@YAHOO.COM>
Subject:      Re: oil pressure
Comments: To: Thomas Pfrommer <pfrommer@phas.ubc.ca>
In-Reply-To:  <46421449.4050001@phas.ubc.ca>
Content-Type: text/plain; charset=iso-8859-1

Oh, I missed a point. The thick one should be between the oil pump housing
and the engine black. The thin one is in between the cover and the housing.

I just looked at my Bentley manual with a magnifying glass. I can't see
the 4 additional holes on the thin one but it has wider sides than the thick
one. So the thinner one is in between the cover and the gear housing.
You did it correctly I think.

David

--- Thomas Pfrommer <pfrommer@phas.ubc.ca> wrote:

> Hi David,
> thanks a lot. Does the thin one has the additional holes (additional to
> the four 8mm holes in the corner)? If I recall right, at least I think I
> used this one between cover and pump.
> And the one with only the holes for the stats between case and pump ...
> Might be that i am wrong ...
> Anyway thanks a lot and take it easy.
> Cheers
> Thomas


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com