You could jack it up high enough to maneuver the trailer beneath it. I have seen someone do this with two halves of a school bus (also with no suspension) to get each end to the salvage yard. He used sections of telephone poles as supports, a large industrial jack, and steadied the bus with chains anchored to several cars. Mike
On 5/18/07, Max Wellhouse <maxjoyce@ipa.net> wrote: > Dear Folks: > > I have an 87 Audi 4kq up on jackstands and missing its control arms, > strut towers etc. and have a gentlemen interested in purchasing this > vehicle as a project car. Transporting this car to his trailer seems > to be the big deal killer right now since it doesn't roll and would > take more cash than I want to spend on it to get it to roll using the > OEM parts. Any creative ideas out there on getting 2500 lbs. to s > trailer? Vanagon content: as part B of the question, pretend it's a > Vanagon w/o the control arms. > > TIA > > DM&FS > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.