Date:         Mon, 21 May 2007 15:15:57 -0400
Reply-To:     Sudhir Desai <sudhir.desai@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sudhir Desai <sudhir.desai@GMAIL.COM>
Subject:      Re: Speedo to tach (?)
Comments: To: David Kao <dtkao0205@yahoo.com>
In-Reply-To:  <174036.35883.qm@web82712.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I took my tach signal from the coil. (temporarily running it inside the van)
I will fix it by putting it through the ecu firewall-grommet, and run
it up the left bottom air-space behind the side-panels.

Sudhir

On 5/21/07, David Kao <dtkao0205@yahoo.com> wrote:
> --- joel walker <jwalker17@EARTHLINK.NET> wrote:
>
> > not sure what your 4th connector would be, though ...
> >
> > good luck! hope it helps.
> > joel
> >
>
> I looked at a Vanagon tach meter I got from a junkyard. The tach meter has 4 pins
> but the connector has only 3 connections. There is one that has no connection.
>
> I have wanted to convert my 84's to have a tach. But the temperature and fuel level
> gauges need to be moved . How are they moved and attached to new positions? I guess
> I need to remove my instrument cluster out of the van to figure it out.
>
> Where did you get the tach signal from? Do you have to get it all the way from the
> coil?
>
> David
>
>
>
> ____________________________________________________________________________________Sick sense of humor? Visit Yahoo! TV's
> Comedy with an Edge to see what's on, when.
> http://tv.yahoo.com/collections/222
>