In a message dated 5/14/07 1:10:06 PM Eastern Daylight Time, dtkao0205@YAHOO.COM writes:
> Yes, I missed mentioning about it. This is really the part that needs > to be done by a machine shop or a tire shop that has the equipment to > bore the center holes. > > Once the center holes are bored out the original hub caps won't mount > any more. So how do you deal with that? > > What were the thickness of the spacers do you have for your audi rims? > 215/75 is a bit wider but it is taller. I'll look into that. > > its all in the archives: http://gerry.vanagon.com/archives/vanagon.html i use 8-10m spacers up front, and longer bolts. as for the centercap, just have the machine shop machine the wheels so they accept the carat centercap chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.